Rigol MSO7014 Oscilloscope, 100 MHz, 4 Analog + 16 Digital Channels, 10 GSa/s

The Rigol MSO7014 oscilloscope is a 100 MHz mixed-signal scope with 4 analog channels, 16 digital channels, up to 10 GSa/s and a 10.1-inch touchscreen. Lost in HCM lists it for rental and sale.

SKU: LIH-MSO7014
Category:

Description

Twenty signals on one timebase sounds like a lot, yet it is what a mixed-signal bring-up often needs. The Rigol MSO7014 oscilloscope combines 4 analog channels and 16 digital channels at 100 MHz, plus an external trigger input. Lost in HCM lists it for rental and sale, and it arranges service on request.

Rigol MSO7014 oscilloscope, family front view with a 10.1-inch screen showing measurement windows over a spectrum display, three USB ports and four color-coded BNC inputs below the screen

Twenty inputs, one trigger

The Rigol MSO7014 oscilloscope covers rails, sensor outputs and slow clocks with its four analog channels. Sixteen digital channels follow buses and control lines. Because both sets share one trigger, a single event can freeze the whole picture. Rigol positions the MSO7000 family for embedded design, serial bus timing, power measurements and automated laboratory testing.

Rigol MSO7014 oscilloscope core figures

Analog bandwidth 100 MHz
Inputs 4 analog + external trigger + 16 digital
Sample rate 10 GSa/s on one channel; 5 GSa/s in half-channel mode; 2.5 GSa/s with all channels on
Memory depth 100 Mpts on a single channel as standard; up to 500 Mpts optional; shared with enabled channels
Waveform capture rate Up to 600,000 waveforms per second under specified test conditions
Vertical resolution 8 bit; up to 12 bit in high-resolution mode
Display 10.1-inch, 1024 x 600 capacitive multi-touch
Generator 2-channel 25 MHz AFG optional

Channel mode, installed options and firmware can change these values, so the quotation decides.

The optional generator

The listing calls a 2-channel 25 MHz generator optional. Therefore, ask Lost in HCM whether your unit carries it. Do not plan a stimulus setup on the assumption that it is fitted.

Long traces and fine detail

Sample rate falls as you enable more channels, so a 20-input capture runs below the single-channel rate. However, the memory option helps a slow bus stay at a fine time step over a long record. The photo shows a family view marked DS7054, with three USB ports and four color-coded inputs, so check the marking on your unit.

Rent or buy a 20-input scope

Rent the Rigol MSO7014 oscilloscope for the weeks around a first power-up. However, buy it when logic and analog debugging fills the whole year. SMK Vietnam only shows the listing, while Lost in HCM supplies the unit and gives the quote. To start, request a quote from Lost in HCM and name your logic probes, memory option and site. The oscilloscope category shows related models, and Rigol holds the datasheets. Order questions go to SMK Vietnam.

MSO7014 questions

Is the generator built in?

The listing calls the 2-channel 25 MHz generator optional. Ask Lost in HCM whether your unit has it.

How many signals can it show?

Four analog signals and sixteen digital signals, plus an external trigger input.

Which logic probe ships with it?

The listing does not name one. Ask Lost in HCM, and put the accessory in your request.

Additional information

Brand

Rigol

Supplied by

Lost in HCM (lostinhcm.com)

Reviews

There are no reviews yet.

Be the first to review “Rigol MSO7014 Oscilloscope, 100 MHz, 4 Analog + 16 Digital Channels, 10 GSa/s”

Your email address will not be published. Required fields are marked *