Rigol DS1074Z-Plus Oscilloscope, 70 MHz, 4 Analog Channels, up to 1 GSa/s, 7-inch Display

The Rigol DS1074Z-Plus oscilloscope offers 70 MHz bandwidth, four analog channels, up to 1 GSa/s and a 7-inch display, with 16 optional digital channels. Lost in HCM lists it for rental and sale.

SKU: LIH-DS1074Z-Plus
Category:

Description

A glitch that appears once in a while is easy to miss on a scope that refreshes slowly. The Rigol DS1074Z-Plus oscilloscope captures up to 30,000 waveforms per second on four analog channels. Lost in HCM lists it for rental and sale, so a team can borrow it for a debugging push or buy it for a station.

Rigol DS1074Z-Plus oscilloscope, front panel with a large color screen showing four channel traces, four BNC inputs, a USB port and a logic connector

Rigol DS1074Z-Plus oscilloscope at a glance

Spec Value In practice
Analog bandwidth 70 MHz Sets how fast a signal it can follow
Channels 4 analog, plus 16 optional digital Digital needs the RPL1116 probe and configuration
Sample rate Up to 1 GSa/s Depends on the channel mode
Memory depth Up to 24 Mpts Needs the applicable configuration
Capture rate Up to 30,000 wfms/s Helps catch rare events
Vertical resolution 8 bit Eight bits per sample
Display 7-inch, 800 x 480 TFT LCD Shows four traces at once

Reading the numbers with care

Values can depend on the enabled channels, the acquisition mode, installed options and firmware. So the top sample rate does not apply to every setup. Confirm the installed memory option too, because the deepest memory needs the right configuration. Do not use these figures for a compliance test until you check the current Rigol documents.

Debugging and bench work

The scope targets waveform inspection, embedded-system debugging and general laboratory measurements. Its signal path runs from the probe through an analog front end to an 8-bit converter and into acquisition memory. Trigger, decode and measurement functions then turn a trace into numbers you can record.

Adding the digital channels

Sixteen logic channels are optional. They need the RPL1116 probe and a matching configuration, so add both to your request if you want to watch buses next to analog signals. Also list probes, attenuation ratios and any serial-bus decode you expect.

What the listing does and does not promise

Rigol lists this model, but availability needs checking for each request. Lost in HCM does not assert local stock, distributor authorization, included options or manufacturer warranty through this listing. Therefore ask for probes, licenses, firmware, calibration evidence and lead time in the quote.

Rental or purchase

Rental suits a bring-up, a failure investigation or a training block. Purchase suits a bench that measures daily. Either way, tell Lost in HCM the bandwidth, channel count and signal types you need.

Requesting a quote

Please request a quote from Lost in HCM and name the Rigol DS1074Z-Plus oscilloscope with your options and delivery site. You can also see more oscilloscopes, check the maker at rigol.com, or contact SMK Vietnam.

DS1074Z-Plus questions

Do I get the 16 digital channels?

Only if you add them. They are optional and need the RPL1116 probe and a matching configuration.

How many waveforms can it capture per second?

Up to 30,000 waveforms per second.

How large is the screen?

It is a 7-inch TFT LCD with 800 x 480 pixels.

Additional information

Brand

Rigol

Supplied by

Lost in HCM (lostinhcm.com)

Reviews

There are no reviews yet.

Be the first to review “Rigol DS1074Z-Plus Oscilloscope, 70 MHz, 4 Analog Channels, up to 1 GSa/s, 7-inch Display”

Your email address will not be published. Required fields are marked *