Keysight N8952A DC Power Supply, 200 V, 210 A, 15000 W, N8900 Series

Description

A 15 kW supply is a facility decision before it is a test decision. The Keysight N8952A DC power supply is an N8900 Series autoranging system supply rated to 200 V, 210 A and 15000 W. Lost in HCM lists it for rental and sale, and it arranges repair intake on request.

Check the AC feed first

The listed input is 400 VAC, three phase. However, the factory-installed AC-input option on the Keysight N8952A DC power supply must match your installation. So ask Lost in HCM for a photo of the unit label and the exact option list before you decide on a rental or a purchase. Then check cabling, grounding, ventilation and rack space with your facility team.

Ratings at a glance

Reading the power envelope

Voltage and current are separate limits, and rated power constrains the output. To find the current at a chosen voltage, divide 15000 W by that voltage. At 200 V the result is 75 A, and at 100 V it is 150 A. Full current of 210 A is available only up to about 71 V. Check the whole envelope in the Keysight data sheet before you plan a test.

Cabling, sensing and safety

High-current connections need an engineering review of conductor rating and connection resistance. Higher-voltage setups also need proper insulation and guarding. Set the overvoltage and current limits from the device under test, then verify polarity before you enable the output. Treat remote sensing and parallel or series operation as configuration-specific, and follow the Keysight user guide for each step.

Where a Keysight N8952A DC power supply fits

• Power electronics development, such as converter inputs and DC-powered assemblies.
• Factory test and burn-in, for example repeated power-on checks and endurance runs.
• Automotive and industrial electronics tests, such as controllers, lighting and motor drives.

However, it is a DC source, so do not assume it replaces a bidirectional battery emulator, a regenerative supply or an automotive transient generator.

Rent, buy or send it for repair

Rental suits a validation campaign or a production ramp. If you plan to buy, state whether new, used or refurbished equipment will do. For repair, send the serial number, the symptoms, any error messages and photographs. Lost in HCM then reviews the case, and it treats repair and traceable calibration as separate jobs. Request a quote from Lost in HCM to begin. SMK Vietnam only shows the listing. You can also browse other power supplies, read the Keysight website or contact SMK Vietnam.

N8952A questions

What power feed does the N8952A need?

The listing shows 400 VAC, three phase, so confirm the installed AC-input option against your site before you order.

Can it deliver 200 V and 210 A together?

No. Rated power limits the output, so the two ratings never apply at once.

Does a quote include cables and software?

Only the items the quotation lists. Ask Lost in HCM to itemize licenses, cables, adapters and any documents you need.