Description
At 150 V, insulation matters as much as the conductor. The Keysight N8760A DC power supply gives one output of 150 V and 34 A, rated 5100 W, as part of the N8700 Series of programmable system supplies. Lost in HCM lists it for rental and sale in Vietnam, and it arranges repair intake on request.
Why 150 V changes the checklist
Higher-voltage setups with the Keysight N8760A DC power supply need proper insulation and guarding, so plan them before the supply arrives. Check the cable ratings, the output terminals and the shielding around the device under test. In addition, follow the Keysight user guide for interlocks and for the discharge procedure after a run.
The ratings give the starting point:
- One output, 150 V maximum.
- 34 A maximum current.
- 5100 W rated output power.
Since 150 V times 34 A equals 5100 W, the corner point matches the rating. Treat it as a limit, because the real operating point must stay inside the envelope.
Matching it to ECU, lighting and motor-control tests
Review the supply against your own test method before you commit. For example, an ECU test may need fast energy flow in both directions, while this unit only sources power. Lighting and motor-control rigs also have inrush and shutdown behavior that you should define up front. Set overvoltage and current limits from the device under test, then verify polarity before you enable the output.
Using the Keysight N8760A DC power supply in development
Design teams use a source in this class to feed converter inputs and DC-powered assemblies. It also supports controlled load testing, where you define the operating points, the transient behavior and the ripple you can accept. Remote sensing and series or parallel use depend on the configuration, so follow the maker’s instructions for them.
Ask before you rent
Ask for a photo of the AC-input label and the option list, because the factory option must match your site. Then request a quote from Lost in HCM and say whether you want to rent, buy or start a repair. You can also see other power supplies, visit the Keysight website or contact SMK Vietnam.
N8760A questions
How much current can I draw at the full 150 V?
The 34 A rating multiplies with 150 V to exactly the 5100 W rating. So the full pair is available, but confirm your own test point on the Keysight data sheet.
Where do I find the connection and discharge steps?
Use the Keysight N8700 Series user guide. It covers AC input, protective earth, output terminals, remote sensing, cable sizing, interlocks and the discharge procedure.
Can it act as a battery emulator for an ECU test?
Not by default. It is a plain DC source, so check energy flow, inrush and shutdown needs against your ECU method before you rely on it.
Reviews
There are no reviews yet.