Keysight N8759A DC Power Supply, 100 V, 50 A, 5000 W, N8700 Series

Description

A production line asks one thing of its supply: do the same job every shift. The Keysight N8759A DC power supply offers one output of 100 V and 50 A, rated 5000 W, in the N8700 Series of programmable system supplies. Lost in HCM lists it for rental and sale in Vietnam, and it arranges repair intake on request.

Listed ratings

• Type: N8700 Series programmable system DC power supply.
• Limits: 100 V, 50 A, 5000 W.
• Outputs: 1.

Here 100 V times 50 A equals 5000 W, so the corner point matches the rating. The figure is a limit, and the real operating point must stay inside it.

Burn-in and factory test with the Keysight N8759A DC power supply

Electronics makers can use a programmable source like this for repeated power-on checks, production screening and endurance runs. The supply holds the start-up conditions steady, so any change in results points to the product. Cooling matters during long runs, so note it in the procedure.

Write the sequence down before the first unit goes in. Include the start-up voltage, the current limits, the order of outputs, the dwell time and the pass-fail rule. Also, record the final settings with the hardware revision and firmware version.

From one station to a whole line

First, start small. Build one representative station, then confirm the automation interface and driver behavior there. After that, copy the setup to other stations, because the same checks apply. Add a DC source like this to a test plan only after you review the method for ECU, lighting, motor-control or industrial-electronics products.

However, keep in mind that it is a plain DC source. So it does not replace a bidirectional battery emulator, a regenerative supply or a specialized automotive transient generator.

What to ask Lost in HCM

Rent the Keysight N8759A DC power supply for a pilot line, a production ramp or an urgent replacement. Choose a purchase quote when the line runs all year. Either way, request a quote from Lost in HCM with your cable needs, protection limits, dates and delivery city. Similar units sit in the power supply category, and the Keysight website covers the maker’s range. For questions about the listing, contact SMK Vietnam.

N8759A questions

What should a burn-in procedure record?

Record the start-up voltage, current limits, output sequencing, dwell time, cooling and the pass-fail conditions, so the next shift repeats the run exactly.

Why trial it on one station first?

Confirm the automation interface and driver behavior on a single representative station. Then you can roll the same setup across a line with fewer surprises.

Does the listing state the AC input?

No. It asks you to confirm the factory AC-input option, so request a photo of the label and the option list before you decide.