Description
Vehicle and plant electronics all begin with a DC rail that must behave. Meet the Keysight N8733A DC power supply, a programmable N8700 Series system unit whose single output reaches 15 V, 220 A and 3300 W. Lost in HCM lists it for rental and sale in Vietnam, with repair intake on request.
Keysight N8733A DC power supply ratings at a glance
| Item | Listed value |
|---|---|
| Instrument type | N8700 Series programmable system DC power supply |
| Maximum output voltage | 15 V |
| Maximum output current | 220 A |
| Rated output power | 3300 W |
| Outputs | 1 |
The 15 V ceiling and the 220 A limit multiply to 3300 W. If your device runs near 12 V, check that 15 V leaves enough headroom for your highest test point.
Testing controllers, lighting and motors
Review the supply against your own method for ECU, lighting, motor-control or industrial-electronics tests. Inrush matters, because many loads draw a surge at start-up. Shutdown behavior matters too. Confirm energy flow, inrush and shutdown needs before you connect anything.
The Keysight N8733A DC power supply is a plain source. Because of that, it does not stand in for a bidirectional battery emulator, a regenerative supply or a specialized automotive transient generator.
Setting limits and sensing with care
Pick the overvoltage and current limits from the device under test. Then confirm polarity, enable the output and log the settings. Remote sensing, parallel and series operation need the maker’s instructions, so read them first. In addition, ask an engineer to check conductor ratings, because 220 A heats a weak joint quickly.
Order through Lost in HCM
Rent for a validation campaign or an urgent replacement, or ask for a purchase quote if the rail serves a permanent station. In each case, request a quote from Lost in HCM and list your load type, AC supply and delivery city. You can also browse power supplies, read about the maker on the Keysight website or contact SMK Vietnam.
N8733A questions
Can the N8733A act as a battery emulator?
Do not assume so. The listing treats it as a DC source, so confirm energy flow with Lost in HCM before you plan that use.
Will 15 V cover my test voltage?
Check your highest test point against the 15 V maximum, and leave a margin for the device and the leads.
Which accessories come with the unit?
Only items listed in the quotation. Cables, adapters and calibration documents each need their own line.
Reviews
There are no reviews yet.