Keysight N6775A DC Power Module, Basic Programmable, 300 W, 60 V, 5 A

The Keysight N6775A DC power module is a double-slot, basic programmable unit rated 60 V, 5 A and 300 W. Lost in HCM lists it for rental and sale.

SKU: LIH-N6775A
Category:

Description

The Keysight N6775A DC power module takes two slots and delivers a basic programmable 60 V, 5 A, 300 W output for N6700 and N6705 systems. Lost in HCM lists it for rental and sale, and it arranges service on request.

Keysight N6775A DC power module, silver module with a green output terminal block, vent slots and a black fan at the rear

Counting slots and watts

This module takes two bays in the mainframe, so it uses space as well as power. Multiply 60 V by 5 A and you reach 300 W, which equals the rating exactly. Therefore the two maximums can run together, and the Keysight N6775A DC power module simply needs a frame with room for both.

Before you book, add up every module you plan to install. The total power budget of the frame, not only the slots, sets the limit. A full rack of double-slot modules can run out of room before it runs out of ideas.

Outputs 1
Maximum voltage 60 V
Maximum current 5 A
Maximum power 300 W
Module width Double slot
Architecture Basic programmable DC
Output response time 0.25 ms
Sensing Four-wire remote sense

The Keysight N6775A DC power module in a test rack

Engineers use this class of module to power device-under-test rails and ATE fixture resources. It also helps in multi-rail sequencing and production verification, where a line checks boards one after another. On the bench, you can pair it with an N6705 DC power analyzer for deeper analysis.

What the module controls

LIST mode, a data logger and arbitrary waveform generation are all available. Four-wire remote sense compensates for lead drop at the device. The listing does not mention slew-rate adjustment, so ask Lost in HCM if you need it.

Ask Lost in HCM

A rental suits one project, while a purchase suits a station that runs daily. For either, send your request to Lost in HCM for the Keysight N6775A DC power module, with the mainframe model, firmware and dates. SMK Vietnam only shows the listing. You can also open the power supplies category, visit the Keysight website or contact SMK Vietnam.

N6775A questions

How many slots does the N6775A use?

The listing says double slot, so plan for two bays in the mainframe.

Is the N6775A autoranging?

No. It has a basic programmable DC output, so check your test points against the 60 V and 5 A limits.

Which response time should I expect?

The listing gives 0.25 ms for the output. Confirm that it suits your fastest load step.

Additional information

Brand

Keysight

Supplied by

Lost in HCM (lostinhcm.com)

Reviews

There are no reviews yet.

Be the first to review “Keysight N6775A DC Power Module, Basic Programmable, 300 W, 60 V, 5 A”

Your email address will not be published. Required fields are marked *