Description
Comparing one test run with the next only works if the source behaves the same way each time. The Keysight N6763A DC power module is a precision autoranging module rated to 20 V and 50 A within 300 W. It takes two slots in N6700 and N6705 systems. Lost in HCM lists it for rental and sale.
N6763A specification list
| Outputs | 1 |
|---|---|
| Maximum voltage | 20 V |
| Maximum current | 50 A |
| Maximum power | 300 W |
| Output architecture | Autoranging |
| Module width | Double slot |
| Output response time | 0.1 ms |
| Sensing | Four-wire remote sense |
| Functions | LIST mode, data logger and arbitrary waveform generation |
What the listing says about precision
The listing calls the Keysight N6763A DC power module a precision module, yet it publishes ratings and no accuracy figures. So request the Keysight data sheet if programming or readback quality drives your choice. A sibling with the same voltage, current and power ratings also exists, and Lost in HCM can explain which one fits your test.
Where 20 V and 50 A stop
Autoranging modules cannot deliver maximum voltage and maximum current at the same time. The listing makes this point directly, and the numbers agree: 20 V times 50 A would be 1,000 W, far above the 300 W limit. Therefore check each operating point against the power ceiling, not against the two figures alone.
Repeatable profiles for production checks
LIST mode stores a profile, and arbitrary waveforms shape the output. The data logger then records what the load did. As a result, a station can replay the same supply event on every unit and compare the logs afterward. Fixtures with long runs of high current benefit most, since four-wire sensing compensates for lead drop at the device.
Using the Keysight N6763A DC power module on a line
Teams use it to power device-under-test rails and ATE fixture resources. Embedded, automotive and industrial electronics development is another common home. Moreover, the module supports multi-rail power sequencing and production verification, and an N6705 analyzer adds bench analysis.
Prepare the request
Give Lost in HCM the voltage and current points you need and the frame you own. State the firmware and the free slots, because this module takes two. Add your leads, the interface and your automation software. Then request a Keysight N6763A quote from Lost in HCM. SMK Vietnam only shows the listing. For more detail, start from the power supply category, the Keysight site or the SMK Vietnam contact page.
N6763A questions
Are accuracy numbers published here?
No. The listing gives ratings only, so ask Lost in HCM for the data sheet if your test needs those numbers.
Can the N6763A hold 20 V and 50 A together?
No. The 300 W limit rules that out, so the module trades voltage for current along its power curve.
Can I replay a power profile on every unit?
Yes. LIST mode, arbitrary waveforms and the data logger exist for that kind of repeatable test.
Reviews
There are no reviews yet.