Keysight N6751A DC Power Module, Autoranging, 50 V, 5 A, 50 W

The Keysight N6751A DC power module is a 50 W autoranging module rated 50 V and 5 A. Lost in HCM lists it for rental and sale.

SKU: LIH-N6751A
Category:

Description

An autoranging module trades fixed limits for a power-limited envelope. The Keysight N6751A DC power module is a 50 W autoranging unit rated 50 V and 5 A, in one slot for N6700 and N6705 systems. Lost in HCM lists it for rental and sale.

Keysight N6751A DC power module, silver one-slot unit labeled as an autoranging module, with a green terminal block and black rear fan

How the 50 W envelope works

Voltage and current each have a ceiling, yet rated power caps their product. Divide 50 W by your test voltage to see the current you can draw.

Test voltage Approximate current ceiling
50 V 1 A
25 V 2 A
10 V or lower 5 A

So the full 5 A is available only at 10 V or below. Check each operating point of your device against the Keysight data sheet.

Why choose the Keysight N6751A DC power module for mixed rails

Because the output autoranges, one Keysight N6751A DC power module can serve a low-voltage logic rail at high current. It can also serve a higher-voltage rail at low current. That helps a bench where the device under test changes often. In addition, the output responds in 0.1 ms, which is quicker than the basic modules in the same family.

Control and sensing

You can adjust the slew rate, run LIST mode and log data. Arbitrary waveform generation is also on the list. As a result, a script can ramp a rail and record the response in one run. Four-wire remote sense then compensates for voltage drop in the leads.

Checklist for the quote

  • List your voltage and current pairs, not only the maximums.
  • Name the mainframe, its firmware and the free slot.
  • State the total power budget of all outputs.
  • Add the leads, connector block and software you plan to use.
  • Give your dates and your delivery city.

Then request a quote from Lost in HCM for the Keysight N6751A DC power module. SMK Vietnam only shows the listing. For related items, see the power supply category, the Keysight site or SMK Vietnam contact page.

N6751A questions

Can it supply 5 A at 50 V?

No. Rated power limits the output to 50 W, so 50 V allows about 1 A.

How fast does the output respond?

The listing gives 0.1 ms. Compare that with your fastest load step before you book.

Is a used module possible?

Lost in HCM may quote new, premium-used or equivalent units, subject to availability and inspection.

Additional information

Brand

Keysight

Supplied by

Lost in HCM (lostinhcm.com)

Reviews

There are no reviews yet.

Be the first to review “Keysight N6751A DC Power Module, Autoranging, 50 V, 5 A, 50 W”

Your email address will not be published. Required fields are marked *