Description
Some DC rails sit far above 60 V. The Keysight N6746B DC power module covers them with a 100 V, 1 A, 100 W output in a single slot for N6700 and N6705 systems. Lost in HCM lists it for rental and sale.
Key ratings
| Outputs | 1 |
|---|---|
| Maximum voltage | 100 V |
| Maximum current | 1 A |
| Maximum power | 100 W |
| Module width | Single slot |
| Architecture | Basic programmable DC |
| Output response time | 0.2 ms |
| Sensing | Four-wire remote sense |
Headroom from the Keysight N6746B DC power module
At 100 V and 1 A the output draws exactly 100 W, so the three ratings line up with no gap. That suits assemblies with a high-voltage bus and a modest current draw. In the same family, the N6745B stops at 60 V but offers 1.6 A, so compare your rail against both before you decide.
A mainframe can also hold several modules with independent outputs, within its slot and power limits. Therefore one frame can feed a high-voltage rail here and a low-voltage rail in the next bay.
Automation features worth using
The Keysight N6746B DC power module lets you set the slew rate, so an input ramps instead of jumping. LIST mode then replays a sequence of voltage and current steps, while the data logger records the result. In addition, arbitrary waveform generation covers custom stimulus. Four-wire remote sense holds the voltage steady at the device, even when the leads are long.
Rent for a project or buy for the bench
Rental fits a validation run, a troubleshooting week, a production overflow or a demonstration. Buying fits a fixture that runs every day. Either way, ask each offer to state its condition, configuration, accessories and delivery time, so you can compare them fairly.
To begin, ask Lost in HCM for a rental or purchase quote on the Keysight N6746B DC power module. SMK Vietnam shows the listing but does not stock, price or ship anything. You can also see other power supplies or visit Keysight. For questions about the process, contact SMK Vietnam.
Quick answers on the N6746B
Is 100 V enough for my fixture?
That depends on your highest rail. Compare it with the 100 V limit, and remember the current stops at 1 A.
Can two modules share one mainframe?
Yes, as long as the mainframe has the slots and the total power. Each output is set on its own.
Does it sense at the load?
Yes. Four-wire remote sense compensates for voltage drop in the load leads at the device under test.
Reviews
There are no reviews yet.