Description
Some devices need a high bias voltage but almost no current. The Keysight N6736B DC power module reaches 100 V on its single output and stops at 0.5 A, with a 50 W ceiling. It takes one slot in an N6700 or N6705 frame. Lost in HCM lists it for rental and sale.
The ratings in short
| Outputs | 1 |
|---|---|
| Maximum voltage | 100 V |
| Maximum current | 0.5 A |
| Maximum power | 50 W |
| Width | Single slot |
| Sensing | Four-wire remote sense |
What 100 V at 0.5 A means for a test
Here the two limits multiply to exactly 50 W, so the output can hold both together. However, the listing describes a basic module and does not mention autoranging. So plan around both ceilings, because extra current at a lower voltage is not part of the stated rating. A load that draws more than half an amp needs a different module.
Fast enough for dynamic work
The output responds in 0.2 ms, while commands take about 32 ms to process. So script your sequences with that gap in mind. You can also set the slew rate, run LIST mode, log data and play arbitrary waveforms. As a result, a single module can step a bias line through a planned profile.
Jobs for the Keysight N6736B DC power module
Engineers reach for a module like this in several places. For example, it powers device-under-test rails and ATE fixture resources. It also supports embedded, automotive and industrial electronics development. In addition, it checks multi-rail power sequencing on a production line, and it pairs with an N6705 analyzer for bench analysis.
Check the frame before you order
The module needs a compatible mainframe. Confirm the model, the firmware, the free slot and the total power budget of every module inside it. Also ask about the output-disconnect relay option. Then list the load leads, the sense leads, the connector block, the interface and the automation software. Rental and used offers can vary by serial number, so a complete list keeps the quote accurate.
Ask Lost in HCM for a quote
SMK Vietnam shows the listing, and Lost in HCM supplies the module. Rent it when a project needs a bias supply, but buy it when the rail stays on the bench for good. To order the Keysight N6736B DC power module, request a quote from Lost in HCM and give your mainframe, quantity and dates. For more context, see the power supply listings, the maker’s Keysight pages or a note to SMK Vietnam.
N6736B questions
Can it supply more than 0.5 A at a lower voltage?
The listing gives 0.5 A as the maximum current and does not describe autoranging, so plan for that limit.
How quickly does the output react?
Output response time is 0.2 ms, while command processing takes about 32 ms.
Can I rent the module without a mainframe?
No. Lost in HCM quotes it with a compatible N6700 or N6705 mainframe, once you confirm voltage, current, interface and duration.
Reviews
There are no reviews yet.