Description
Powering a device under test often takes several rails, so each rail needs its own limits. The Keysight N6734B DC power module delivers one output of up to 35 V and 1.5 A, at up to 50 W, in a single slot. Lost in HCM also lists it for rental and sale.
One slot, up to four outputs per mainframe
This module also fits Keysight N6700 low-profile modular power systems and N6705 DC power analyzers. Because it takes one slot, a compatible mainframe can hold up to four independently configured outputs. So a team can build a multi-rail supply for a board simply by choosing modules.
What the module offers
- One output of up to 35 V, 1.5 A and 50 W, so it suits low-voltage rails.
- An output response time of 0.2 ms, plus a command processing time of 32 ms.
- Four-wire remote sensing, so the load sees the voltage you set.
- Adjustable slew rate, LIST mode, a data logger and arbitrary waveforms, such as stepped rail profiles.
Dynamic tests and the voltage drop in your leads
For example, LIST mode, the data logger and the slew rate control let a script step a rail through a planned sequence. Four-wire sensing then compensates for the voltage drop in the load leads, so the board sees the voltage you set. However, the module tops out at 35 V. So if your rail needs more voltage and less current, look at the N6735B, which Lost in HCM lists separately.
Check the mainframe first
First, decide which mainframe will host the module and which firmware it runs. Then check that a slot is free, because the total power budget must allow another module. Also decide whether you need the output-disconnect relay option. Next, list the load and sense leads, the connector block, the interface and the automation software. As a result, nothing stalls on arrival.
Where teams use the Keysight N6734B DC power module
- Powering device-under-test rails, plus ATE fixture resources.
- Developing embedded, automotive and industrial electronics, because those boards use many rails.
- Multi-rail power sequencing, then production verification.
- Bench analysis, as well as work alongside an N6705 DC power analyzer.
Request a Keysight N6734B DC power module quote
SMK Vietnam shows this listing while Lost in HCM supplies the module and quotes rental, purchase or service. First, request a quote from Lost in HCM with your mainframe model, dates and quantity. As well as this module, you can browse the power supply category. The Keysight website also has the maker’s documents, and you can contact SMK Vietnam for help.
N6734B questions
How much power does one N6734B deliver?
One module delivers up to 50 W from a single output, so the 35 V and 1.5 A rating applies to that channel.
Which mainframes accept it?
It also fits Keysight N6700 low-profile modular power systems and N6705 DC power analyzers. Then confirm the firmware and free slot with Lost in HCM.
Can it compensate for lead drop?
Yes. Four-wire remote sensing therefore offsets the voltage drop in the load leads at the device under test.
Reviews
There are no reviews yet.