Description
Low-voltage logic and sensor rails often ask for real current, not just a few volts. The Keysight N6731B DC power module answers with 5 V at up to 10 A from a single output. It occupies one slot, and its power limit is 50 W. Lost in HCM lists it for rental and sale, and it arranges service on request.
Ratings
| Outputs | 1 |
|---|---|
| Maximum voltage | 5 V |
| Maximum current | 10 A |
| Maximum power | 50 W |
| Module width | Single slot |
| Platforms | N6700 low-profile modular power systems and N6705 DC power analyzers |
| Output response time | 0.2 ms |
| Command processing time | 32 ms |
| Sensing | Four-wire remote sense |
Why low voltage with high current matters
This module favors current over voltage. In contrast, the 60 V N6735B favors voltage and offers far less current. So the N6731B fits the supply rails of low-voltage electronics. Check your load against both limits, because 5 V and 10 A together equal the 50 W maximum.
Keep the voltage right at the load
Long leads drop voltage when current flows. Four-wire remote sensing measures the voltage at the device under test, so the supply can compensate for that drop. This matters most at 10 A, where even short leads lose some voltage.
More than a fixed supply
You can program the voltage and current, then set the slew rate. In addition, LIST mode, the data logger and arbitrary waveform generation support dynamic tests. For example, a script can step a rail through a brownout sequence while the logger records the current.
Where the Keysight N6731B DC power module fits
- Powering board rails and ATE fixture resources
- Embedded, automotive and industrial electronics development
- Multi-rail power sequencing and production verification
- Bench analysis with an N6705 DC power analyzer
A compatible mainframe holds up to four independently configured outputs, so one chassis can power several rails.
Prepare your request
Name the mainframe, its firmware and the slot you plan to use. Then add the total power budget, the number of outputs, the cables and the control interface. Lost in HCM uses these details to match a module and a chassis.
Order the module
Lost in HCM supplies the equipment, while SMK Vietnam only presents the listing. To order the Keysight N6731B DC power module, request a quote from Lost in HCM. You can also browse the power supply listings, visit Keysight or contact SMK Vietnam.
N6731B questions
How much current can it deliver?
The output reaches 10 A at up to 5 V, within a 50 W limit.
Which mainframes accept it?
It suits N6700 modular power systems and N6705 DC power analyzers. Confirm firmware, slots and total power before ordering.
Can I buy a used module?
New, premium-used and equivalent modules may be quoted, subject to availability, configuration and inspection.
Reviews
There are no reviews yet.