Keysight E36313A power supply rental, triple-output 160 W bench DC supply

Keysight E36313A Power Supply Rental, Triple Output, 160 W, 6 V/10 A and ±25 V/2 A

Name: Keysight E36313A Power Supply Rental, Triple Output, 160 W, 6 V/10 A and ±25 V/2 A
Brand: Keysight
SKU: LIH-keysight-e36313a
Availability: InStock

Choose a Keysight E36313A power supply rental for mixed-voltage boards. It has three outputs, 160 W in total, low noise, output sequencing and a built-in logger. Lost in HCM supplies it for bring-up, burn-in and test racks.

SKU: LIH-keysight-e36313a

Category: Power supplies

Brands: Keysight

Description

A new board rarely runs on one rail. The Keysight E36313A power supply rental gives you three outputs in one quiet bench unit: 6 V at 10 A, plus 25 V and -25 V at 2 A each. That covers a logic rail and an analog pair, so one supply can feed most mixed-signal designs.

What makes the E36313A a good bench partner

Clean power protects your measurements as well as your device. This model keeps output noise below 350 µVrms, so it suits sensors and audio paths. It also sequences its outputs. As a result, a board that needs a set power-up order starts the same way every time. On top of that, the internal logger records voltage and current, which helps you prove a consumption profile to a customer.

Typical rental projects

Teams in Vietnam usually rent this supply for a defined job with a clear end date. Here are common examples:

Firmware bring-up on a first batch of prototype boards.
A temporary burn-in rack during a production ramp.
IoT and sensor development where noise matters.
An automated test station that runs for a few weeks.
Cover while your own supply is out for repair or calibration.

Sizing the Keysight E36313A power supply rental

Start with your rails. If the board needs 5 V logic at a few amps and a ±15 V analog pair, this unit fits well. However, check the total: the three outputs share a 160 W limit. Also check the current on each rail. For example, the two 25 V outputs each stop at 2 A. If you need more power or more channels, a modular DC system may suit you better. So ask Lost in HCM to compare options before you book.

Remote control

The supply has LAN, USB and GPIB. Therefore you can drop it into a scripted test rack and send it back when the campaign ends.

On arrival and at return

The box holds the supply, a power cord, a LAN cable, a set of output leads, the manual and a calibration certificate. Before you connect a board, set each output to a safe limit and check it with a meter. During the hire, keep the leads with the unit. At return, switch the outputs off, clear stored sequences and pack all cables.

SMK Vietnam lists this supply for Lost in HCM, who handle stock, terms and pricing. Just request a quote from Lost in HCM to start. You can also check other power supply rentals, see the Keysight site, or contact SMK Vietnam.