Keysight DP5788AL DC Power Supply, 80 V, 94 A, 7,520 W, Low-Line AC Input

Description

Power-device and module evaluation needs a clean, high-power DC source plus a lot of support gear. The Keysight DP5788AL DC power supply gives 80 V at 94 A, 7,520 W, on a low-line AC input. Lost in HCM quotes it for rental or sale.

The supply, fixtures and the rest of the test system

The supply is only one part of the bench. You also need suitable measurement equipment, current handling, thermal management and fixtures. In addition, add an emergency shutdown that cuts power on any fault. Plan these items together, not one by one.

Replacing an installed supply

If the Keysight DP5788AL DC power supply will replace a unit already in your rack, send Lost in HCM the full label and your system drawings. Similar front panels do not guarantee the same input, output rating, connectors or command set. As a result, a label check saves rework later.

AL or AH?

The AL marks low-line AC. Its AH twin with the same 80 V and 94 A rating runs on high-line. Match the suffix to your wall feed. If you plan to move the supply between sites, record the suffix on the asset tag. Then nobody plugs it into the wrong feed, and nobody has to guess later.

Qualification and research settings

Controlled qualification work asks the responsible engineer to confirm configuration, calibration expectations and environmental limits first. State your calibration needs in the request, since status can differ from unit to unit.

Thermal and safety planning

A 7,520 W supply works hard inside a test cell. Keep the rack vents clear, because trapped heat shortens the life of every part nearby. Then confirm the ambient limits in the Keysight documents. In addition, keep a clear path to the emergency stop, and make sure each operator knows where it is.

Quote and contact for the Keysight DP5788AL DC power supply

Ask Lost in HCM for a quote and say whether you prefer rental or purchase. For help with the listing, contact SMK Vietnam or browse the power supply listings.

DP5788AL questions

What else do I need besides the DP5788AL?

Plan measurement gear, fixtures, cables, thermal management and an emergency stop. The supply alone does not complete a power-device test.

Can Lost in HCM quote an alternative?

Yes. It reviews whether the exact model or a technically suitable alternative fits, so share your voltage, current and system needs.

Do I need drawings for a replacement?

Send them if you can. The full label and your system drawings help Lost in HCM compare input, output, connectors and command set before it quotes.