Description
Low voltage does not mean low power. The Keysight DP5746AS DC power supply tops out at 60 V, yet it can push 56 A, which adds up to 3,360 W from one output. It runs from a single-phase 200/240 VAC feed. Lost in HCM lists it for rental and sale, so a team can borrow it for a project or buy it for a rack.
Big current from a 60 V ceiling
Many loads sit well below 60 V and still draw heavy current. Battery-powered assemblies, DC-DC converter stages and motor-drive prototypes are common examples. For those jobs, the 56 A rating matters more than spare voltage. In addition, the case is a compact 1U system supply, so it leaves room for meters and switching gear in the same rack.
Keysight DP5746AS DC power supply ratings
| Item | Value |
|---|---|
| Outputs | 1 |
| Maximum voltage | 60 V |
| Maximum current | 56 A |
| Maximum power | 3,360 W |
| AC input | Single-phase 200/240 VAC |
| Voltage programming accuracy | 30 mV |
| Noise and ripple | 80 mV peak-to-peak |
| Output response time | 50 ms |
| Interfaces | GPIB, LAN, USB, LXI and analog/resistance control |
Voltage programming accuracy is 30 mV, and noise and ripple stay at 80 mV peak-to-peak. Output response time is 50 ms. If your device tolerates a few hundred millivolts of ripple, those figures leave room. If it does not, compare them with your limits first.
Scripts, slopes and safeguards
Adjustable slew rate and arbitrary waveform generation let the output ramp, step or sag on a schedule. The supply also measures its own voltage and current, so a script can verify each step without extra meters. Overvoltage, overcurrent and system protection reduce the risk to the device under test. GPIB, LAN, USB and LXI link the unit to a controller, while analog and resistance control add a hardware route.
Where the Keysight DP5746AS DC power supply earns its place
- Automated production and qualification racks
- Power-device and converter validation
- Automotive and industrial electronics testing
- Laboratory development that needs programmable DC power
Order through Lost in HCM
Check the single-phase feed and breaker size before you book the Keysight DP5746AS DC power supply. The input decides whether it runs on site. Then request a quote from Lost in HCM and say whether you want to rent or buy. You can also browse the power supplies category, read about Keysight or contact SMK Vietnam. Lost in HCM supplies the unit and gives the quote.
DP5746AS questions
How much current can the DP5746AS deliver?
It delivers up to 56 A at a maximum of 60 V, which equals 3,360 W.
Does it need three-phase power?
No. The listing gives a single-phase 200/240 VAC input.
Can I use it for a short test campaign?
Yes. Lost in HCM lists it for rental, so ask for a quote that covers your dates.
Reviews
There are no reviews yet.