Description
A 600 V source usually brings a heavy mains requirement with it. The Keysight DP5736A DC power supply lists a single-phase 100/240 VAC input instead. It still delivers up to 600 V and 2.6 A, which equals 1,560 W. Lost in HCM lists it for rental and sale in Vietnam.
High-voltage output, single-phase input
That mix helps labs without a three-phase panel nearby. Even so, confirm the facility supply, the connector and the protection scheme before you request a quote. The unit is a compact 1U system supply with one output, so it also saves rack space.
| Item | Listed value |
|---|---|
| Outputs | 1 |
| Maximum voltage | 600 V |
| Maximum current | 2.6 A |
| Maximum power | 1,560 W |
| AC input | Single-phase 100/240 VAC |
| Voltage programming accuracy | 300 mV |
| Noise and ripple | 500 mV peak-to-peak |
| Output response time | 80 ms |
| Interfaces | GPIB, LAN, USB, LXI and analog/resistance control |
Reading accuracy and ripple at 600 V
Programming accuracy is 300 mV, ripple is 500 mV peak-to-peak, and the output responds in 80 ms. Those numbers are small beside 600 V. However, a low-voltage sense stage on your board may care about the ripple, so compare it with your own limits first.
Handle the Keysight DP5736A DC power supply with care
Use leads and connectors rated for the full output, and follow the Keysight manual for wiring and discharge. In addition, overvoltage, overcurrent and system protection help guard the device under test. An adjustable slew rate and arbitrary waveform generation also let a script ramp the voltage gently.
Jobs for a 600 V source
Power-device and converter validation is the obvious fit for the Keysight DP5736A DC power supply. Beyond that, the listing names production and qualification racks, automotive and industrial electronics testing, and laboratory development. Rent the unit for a single validation campaign, or buy it when the rack runs daily.
Get a quote for the Keysight DP5736A DC power supply
Tell Lost in HCM the output you need, your mains range and the delivery site. Then request a quote from Lost in HCM. If you want alternatives, open the power supply listings, or contact SMK Vietnam for guidance. The manuals live at Keysight.
DP5736A questions
Does it run from 100 VAC mains?
The listing states single-phase 100/240 VAC. Ask Lost in HCM which range the offered unit and your site will use.
Why does the AC input matter for this unit?
This configuration lists a single-phase 100/240 VAC input, so confirm the facility supply, connector, protection and installation plan before the quote.
How much current is available at the full 600 V?
The listing gives up to 2.6 A, which makes 1,560 W with the full voltage.
Reviews
There are no reviews yet.