Description
Low-voltage rails often ask for more current than a small supply can give. The Keithley 2260B-30-36 power supply reaches 36 A, while its voltage tops out at 30 V. The rating is 360 W, and Lost in HCM lists it for rental and sale in Vietnam.
Where the full 36 A is available
Divide 360 W by 36 A and you get 10 V. So the unit can hold its full current only up to about 10 V. At 30 V, the same rating limits the draw to 12 A. Work out your own operating point before you request a quote, because a load that needs 30 V and 36 A together will not fit.
| Rating | Listed value |
|---|---|
| Outputs | 1 |
| Maximum voltage | 30 V |
| Maximum current | 36 A |
| Maximum power | 360 W |
| Connectivity | USB, LAN and analog control |
Three ways to command the output
- USB links the supply straight to a PC for scripts and logging.
- LAN lets a rack controller reach it across the test network.
- Analog control gives a fixture or line controller a hardwired option.
Check the Keithley manual for what the analog port covers before you wire anything. Meanwhile the digital links stay available for the rest of the station.
Jobs for a 36 A source
The listing points to production testing, life testing, device characterization and power-system development. In practice, the Keithley 2260B-30-36 power supply covers actuator, relay-bank and low-voltage module tests that pull heavy current at a modest voltage. For more current at 30 V, the 2260B-30-72 and 2260B-30-108 sister listings reach 72 A and 108 A, but they carry bigger power ratings.
Request the Keithley 2260B-30-36 power supply
Confirm the AC line option, the lead gauge for 36 A, the rack arrangement and the software support. Then request a quote from Lost in HCM and say whether you want to rent for a project or buy. You can also compare power supply listings, check Tektronix for Keithley details, or contact SMK Vietnam.
30-36 questions
How much current can I draw at the full 30 V?
About 12 A, because 360 W divided by 30 V is 12 A. The 36 A figure applies at lower output voltage.
Can a production fixture command it without software?
The listing names analog control next to USB and LAN, so a hardwired signal may be possible. Ask Lost in HCM what the analog port covers.
Where do I send a rental request?
Use the quote link on this page. Lost in HCM supplies the unit and gives the quote.
Reviews
There are no reviews yet.