Description
Not every calibration round needs a documenting calibrator. A Fluke 726 process calibrator rental suits teams that want high field accuracy but plan to log results by hand. The 726 sources and measures the common process signals at 0.01% of reading, and its dual display shows source and measured values together.
Accuracy without the paperwork
Documenting tools such as the Fluke 754 store as-found and as-left data and upload it. That is useful, yet it adds cost and set-up time. So many plants split the work. They rent a 754 for audit campaigns and a 726 for routine loop checks, because the simpler key layout makes repeat tests quick.
Signals the 726 handles
- Source and measure mA, V, frequency and resistance.
- Thermocouple and RTD sourcing and measurement.
- Pressure measurement with 29 Fluke 700P modules.
- Loop power while it measures mA at the same time.
- Stored setups for the tests you run most.
Adding pressure modules
The 726 reads pressure through Fluke 700P modules. Therefore, tell Lost in HCM the ranges of your gauges and transmitters when you ask for a quote. They can add the matching modules to the rental on request.
Example: checking PLC analog cards at start-up
During commissioning, each analog input card needs a known signal. First, the technician sets the 726 to source 4 mA, then 12 mA and 20 mA. Next, the engineer reads the PLC value at each step. Finally, they note any error and adjust scaling. With stored setups, the next card takes only a few minutes.
Other reasons for a Fluke 726 process calibrator rental
Food and beverage plants rent it to verify temperature loops. Water and wastewater utilities use it on pressure and flow transmitters. In addition, it covers the gap while your own calibrator is away for its annual check.
Kit and quote
Each rental unit ships with a test-lead and clip set, thermocouple mini-plug adapters, batteries, a soft case and the maker’s user manual. You also receive a calibration certificate and a printed hand-over checklist. Our partner Lost in HCM owns this unit, and SMK Vietnam simply lists it. For rates and free dates, request a quote from Lost in HCM. Other calibrator rentals sit in our catalog, and the official Fluke site has full details. Questions? Contact SMK Vietnam.
FAQ
Does the 726 document results automatically?
No. It stores test setups, not full calibration records. For automated records, rent the Fluke 754.
Can it power a transmitter loop?
Yes. It supplies loop power and measures the mA signal at the same time.
Are pressure modules part of a Fluke 726 process calibrator rental?
They are optional. Lost in HCM adds 700P modules on request and lists them in the quote.
Reviews
There are no reviews yet.